T-Fuse Holder / 110-200A

This professional fuse holder is designed for use with T-fuses in high-load circuits. For protecting powerful batteries, especially lithium types, and consumers such as bow thrusters, inverters or electric drives. Geeignet für 110-200 A Sicherungen.
The robust design with four 6 mm threaded bolts allows the fuse to be changed without disconnecting the connecting cables at the same time. This fuse holder and the matching T-fuses are particularly suitable for use in potentially explosive atmospheres. Features removable tabs on the cover for side-exit install of connection cables if required.

Features

• Suitable for T-fuses between 110-200 A (fuse dimensions: Length approx. 62 mm, connection width approx. 22 mm, hole spacing approx. 43 mm)
• Enough space to quickly and easily install cable lugs with 6 mm hole
• Change the fuse without disconnecting the connecting cables at the same time
• Insulating cover meets ABYC and USCG requirements
• Removable tabs in the cover allow cable access from all directions
• Large tin-plated copper mounting blocks with large contact surfaces ensure good conductive contacts, solid fuse and cable lug fastening and sufficient heat dissipation at high currents.
• Rustproof 6 mm stainless steel threaded bolts (1/4"-20) and serrated flange nuts ensure a secure hold of cable lugs and fuse even during vibrations and temperature changes
• Highly heat-resistant and flame-retardant base material in line with UL 94-V0
• Fuse holders and T-fuses are suitable for use in potentially explosive atmospheres in accordance with ISO 8846 and SAE J1171

Technical data

Max. current 160 A* Maximum voltage 160 V DC Connection material Tin plated copper, stainless steel threaded bolts and nuts Safety bolt 6 mm Ø (1/4"-20) Connection bolt cable lugs 6 mm Ø (1/4"-20) Dimensions (L x W x H) Approx. 178 x 51 x 59 mm Weight: 0.5 kg

*In practice, the fuse value may be 20% higher than the maximum permitted current of the fuse holder. Please consider this higher current also with regard to the cross-section of the connecting cables.