Detalles del producto

This foldable solar module with charge regulator impresses with its high energy yield, low weight and ability to fit into small spaces.

Folded up in the textile frame, this module is an inconspicuous companion, which is quickly ready for use. The textile module carrier features riveted eyelets, which can be used to fix the module in place, e.g.. with a rubber cord or ratline. Of course, the module can very easily be laid out. In addition, it has installation supports which are held on the module support by Velcro straps when not in use and with the help of which the module can also be aligned to low sunlight.
In the outer compartment of the textile module carrier, there are the ready-wired module connections with approx. 4.5 m cable, the PHOCOS CMLup 10 solar controller and approx. 1.4 m battery connection cable with adapter plug connection. Matching the adapter plug connection and also included in delivery: three approx. 1 m long adapter cables with alligator clips, ring cable lugs (5 mm inner Ø) and cigarette lighter plug. The cigarette lighter plug features a 10 A micro fuse. Length of the battery connection cable incl. regulator and adapter cable approx. 7 m. The controller's 5 V USB output can be used to power mobile devices such as smartphones, tablets, cameras, etc.

Technical data:
System voltage 12 V
Rated output 120 W (3 x 40 W)
Current at max. output 6.1 A
Operating temperature -40 °C to +85 °C
Frame Textile
Module cable 4500 mm / 2.5 mm²
Battery cable 500 mm / 3 mm²
Unfolded dimensions 1280 x 540 x 4 mm
Folded dimensions 540 x 410 x 20 mm
Weight 2.9 kg
Charging controller 12 V DC / 10 A
Charge controller output 5 V DC / 800 mA
Certifications CE, RoHS

Notes
  • When using an alligator clip adapter or ring cable lug adapter, we also recommend fitting a 10 A fuse close to the battery (max. 20 cm).
    Fuse holders and micro fuse holders are optionally available.
  • Although the PHOCOS MLPup controller used is capable of detecting 12 or 24 volt battery systems, the module can only be used in 12 volt on-board systems due to the 17.6 Vmp output voltage.
  • The controller is not splash-proof and must therefore be stored in a dry environment!
  • Further technical data of the controller can be found within the operating instructions.
    The instructions can be found in the documents below.
  • Please observe the instructions in the operation manual!

Documentos

multi-flag Ficha técnica
PDF, 373,30 KB
multi-flag Ficha técnica
PDF, 1,34 MB
multi-flag Manual
PDF, 2,73 MB
multi-flag Manual
PDF, 2,02 MB
multi-flag Manual
PDF, 946,23 KB

Esto es lo que otros clientes de SVB opinan

Evaluaciones 100% auténticas

2 Opiniones de clientes

5 (de 2 evaluaciones)
4 Estrellas
(0)
3 Estrellas
(0)
2 Estrellas
(0)
1 Estrellas
(0)
Olaf K.
por Olaf K. Bandera nacional de Alemania 5/7/2019 Compra verificada
Alles ok ....
Uwe S.
por Uwe S. Bandera nacional de Alemania 28/7/2017 Compra verificada
Solarmodul
Ha cumplido totalmente mis expectativas. Usando pinzas de cocodrilo se pueden utilizar de forma flexible, cubre el requerimiento diario en el Mediterráneo un yate normal.

Clientes preguntan a clientes

Haga sus preguntas a otros clientes de SVB que ya han comprado este producto y obtenga su opinión.

Su pregunta será automáticamente enviada a otros clientes de SVB y publicada en la página del producto. Por favor no realice preguntas que sólo el equipo de SVB puede responder, como el estado de un pedido o la disponibilidad de un producto. Para preguntas que se refieren a un pedido, por favor contacte a nuestro equipo SVB por email info@svb-marine.es o por teléfono al: 960 13 06 40 .

  • "Clientes preguntan a clientes" está disponible en los siguientes idiomas :
  • Bandera nacional de Deutsch
  • Bandera nacional de Français
  • Bandera nacional de English
Aún no existen preguntas sobre este producto. ¡Sea el primero en realizar una pregunta!