MENTE MARINE Fully Automatic ACS R Trim Tab Control
Art. Núm.
23534
Código EAN del producto
00096962005764
Núm. de modelo
ACS-R
Descripción
MENTE MARINE - Fully Automatic Trim Tab Control System ACS R
Detalles del producto
The deep V-hulls of modern pleasure boats are designed to allow for a smooth ride in rough water conditions. The deeper the V, the greater need there is to keep the trim tabs straight. The rollers and lateral inclination depend on the wind and the positioning of passengers. The longitudinal tilt (pitch), also called trim, depends on both speed and load.
Course changes will also change wind direction, causing the boat to re-trim. If passengers change their position, the vessel must also be re-trimmed. The need to constantly trim in order to adapt to changing load conditions, places unnecessary stress on the coxswain and therefore represents a safety risk when traveling at high speeds.
The automatic trim system (ACS) takes control of this process for you. Trim changes caused by wind, new courses or the changing seating positions of passengers are automatically compensated for by this system.
The ACS R automatically adjusts the boat into the optimal trim with respect to the rolling axis by eliminating heeling. It is the best choice for small and fast boats with minimal bow rises.
Suitable for almost all existing trim tab systems!
How it works: The switch panel makes a manual trim system into a fully automatic trim system.
Installation: The existing operating unit can only be swapped with the ACS operating unit from Mente Marine - connection of 6 cables. The built-in sensors measure the movements of the boat.
Technical data:
- Compatibility (Hydraulic trim tabs)
- Bennet, Instatrim QL, Trimmaster, TFX Teleflex, TX Controls
- Compatibility (Electro-mechanical trim tabs)
- Lectrotab, Lenco, Eltrim, Ultraflex, Bennet
- Control of roll and longitudinal axis
- Vessel length: 15-40 feet (4.5-12 m)
- Trim tab type detection: Automatic
- Sensitivity: Automatic, adaptive to vessel type
- Dimensions (WxHxD): 80 x 77.5 x 19 mm
- Waterproof: IP68
- Operating temperature: -10°C - +85°C
- Storage temperature: -40° - +85°C
- Power supply: 10-30 V DC
- Max. power consumption: 18A (when the trim tabs are active)
- Power consumption: 0.02A (idle)
- Certification: CE
Documentos
Otros clientes también han comprado
YACHTICON
AQUA CLEAN sin cloro
desde
9
10
€
LOFRANS
Molinete X1
desde
828
65
€
951,12 €
-13%
GLOMEX
RA135 4-Way Tilt-Base for RA300 Antenna
por solo
27
40
€
32,67 €
-16%
BAVARIA
Flyscreen for Stainless Steel Portlight, 7RE
por solo
57
91
€
BAVARIA
Terminal para cintón
por solo
58
92
€
SEATEC
Gelcoat
desde
29
44
€
38,59 €
-24%
Artículos similares
LENCO
LENCO Electric Dual Trim Tab Kit / without GPS Antenna And Network
por solo
1.850
54
€
1.956,57 €
NUEVO
LENCO
Auto Glide Automatic Trim Tab Control / with GPS Antenna and Network
por solo
2.135
24
€
2.254,23 €
-5%
LENCO
Auto Glide Automatic Trim Tab Control / without GPS Antenna and Network
por solo
1.504
82
€
1.586,31 €
-5%
LENCO
Kit RetroFit / actualización de Bennett 12 V a Lenco
por solo
406
67
€
512,19 €
-21%
MENTE MARINE
Fully Automatic ACS A Trim Tab Control
por solo
996
42
€
MENTE MARINE
Control automático para flaps ACS RP
por solo
782
89
€
Clientes preguntan a clientes
Haga sus preguntas a otros clientes de SVB que ya han comprado este producto y obtenga su opinión.
Su pregunta será automáticamente enviada a otros clientes de SVB y publicada en la página del producto. Por favor no realice preguntas que sólo el equipo de SVB puede responder, como el estado de un pedido o la disponibilidad de un producto. Para preguntas que se refieren a un pedido, por favor contacte a nuestro equipo SVB por email info@svb-marine.es o por teléfono al: 960 13 06 40 .
- "Clientes preguntan a clientes" está disponible en los siguientes idiomas :
-
Aún no existen preguntas sobre este producto. ¡Sea el primero en realizar una pregunta!