Art. Núm.
55805
Núm. de modelo
55805
Descripción
SEATEC - YACHTING 225
Suelo
Suelo de tablillas / listones
Eslora
2,25
m
Ancho
1,34
m
Número de personas
2,5
Capacidad de carga máx.
300
kg
Potencia máxima del motor
3,3
PS
Peso máximo del motor
24
kg
Material
5-layer PVC with polyester fabric inlay
Grosor del material
0,5
mm
Tubo - Ø
350
mm
Cámaras de aire
3
Presión del aire
0,25
bar
Largo del eje
Eje corto
Altura del espejo
380
mm
Peso neto
20,4
kg
Motor incluido
No
Certificación
No
Color
Light grey/white
SVB recomienda lo siguiente para este artículo
Detalles del producto
These SEATEC YACHTING tenders arn't just suitable as tenders for smaller yachts, they are also especially suitable for usage during excursions and fishing trips as well. When packed up, these boats are very compact and they can even fit in to the trunk of a small car.. They can be quickly packed away or inflated. The major strengths of these units are their stability, comfort and safety on the water!
Easy to handle, even with heavy loads and several people on board - these SEATEC boats provide a safe driving experience at all times. Whether powered by a motor or by rowing, the large diameter air chambers, in conjunction with the enhanced cone buoyancy tubes provide adequate buoyancy in all situations.
The material of these vessels is extremely weather-, abrasion-, oil-, salt water-, fading-, UV light- and aging resistant. The hull consists of 5-layer laminate PVC. The base fabric is extra strong (1100 dtex) and is coated on both sides.
Standard equipment:
- Extra wide floor slats
- 3 air chambers for increased safety
- Flush "Halkey Roberts" - valve
- 2 sturdy, collapsible aluminum paddles with plastic sheaths
- 3 towing eyes in the bow area
- 3 carrying handles, two on the stern, one on the bow
- 2 additional carrying ropes on the inside of the stern
- Dual-sided grip cord
- Circumferential baseboard
- Wooden transom with reinforcement for motor mounting
- Bailer in the transom
- Seating board
- Foot pump, carrying bag, repair kit

Technical data:
Colour | Dark-blue/white |
Bow form | Modern (MX) |
Slats | Type A in dark-grey/white |
Lifeline | 2 rope holders |
Seating board | 1 |
Towing eyes/Transport eyes | 3 / no |
Length | 2.25 m |
Width | 1.34 m |
Length (inner) | 1.46 m |
Width (inner) | 0.61 m |
Tube diameter | 35 cm |
Air chambers | 3 sections |
Pack size (L x W x H) | 103 x 58 x 28 cm |
Empty weight | 20.4 kg |
Air pressure | 0.25 bar |
Max. engine power | 2.5 kW / 3.3 hp |
Max. engine weight | 24 kg |
Payload | 300 kg |
Carrying capacity | 2.5 |
Note regarding the material:
The SEATEC YACHTING tenders are made of a special 5 layer PVC (polyvinyl chloride) material. The base consists of a poly fiber (polyester) fabric lining. The fabric is made of 1100 Decitex and is thus very sturdy. The fabric is lined on the interior and exterior with a so-called adhesive layer. This layer serves as a substrate for the equally double-sided PVC coating. Thanks to the PVC coating, the dinghy is airtight and sturdy. Only first-rate PVC material is used, which has specially been developed for the production of dinghies and has proven its durability for years. The material strength is approx. 0.7 mm and the boat's skin weighs about 850 g/m². The material is made in Germany. Max. tensile force is approx. 2500 N/ 5 cm.
Accesorios
Otros clientes también han comprado
Artículos similares
Clientes preguntan a clientes
Haga sus preguntas a otros clientes de SVB que ya han comprado este producto y obtenga su opinión.
Su pregunta será automáticamente enviada a otros clientes de SVB y publicada en la página del producto. Por favor no realice preguntas que sólo el equipo de SVB puede responder, como el estado de un pedido o la disponibilidad de un producto. Para preguntas que se refieren a un pedido, por favor contacte a nuestro equipo SVB por email info@svb-marine.es o por teléfono al: 960 13 06 40 .
Aún no existen preguntas sobre este producto. ¡Sea el primero en realizar una pregunta!