Detalles del producto
The EX models can be used in all types of boats, from sailboats and motorboats to catamarans with steel, aluminium, wood or GRP hulls.
As the external bow thruster is installed further forward towards the bow compared to a conventional tunnel bow thruster and has a significantly lower installation position, a much better leverage effect is achieved. This means that the EX series bow thrusters can move considerably larger boats with a lower nominal power.
Very short cross channel and ideal positioning reduce water resistance compared to conventional systems. Loss of speed is not noticeable.
Only three small installation holes are required, which are sealed with special rubber gaskets. No laminating necessary.
External design results in significant noise reduction. Deeper installation position for minimal cavitation.
Longer operating times
The external mounting position under the hull allows efficient cooling. This results in considerably longer operating times than with conventional systems.
The external construction of the unit saves a lot of space on board compared to conventional systems.
The significantly shorter cross tunnel and ideal leverage effect due to the deeper installation position, further away from the pivot point, result in optimum efficiency. This enables an increase in efficiency of up to 40% compared to conventional systems.
All components of the EX series are carefully constructed coordinated so that the systems meet the highest quality requirements. Manufactured in our ISO-certified factory in Fredrikstad.
i-BOX - Intelligent system control
- Minimum electronic switching delay in case of abrupt change of thrust direction
- Permanent monitoring of the relay function
- Automatic deactivation of the bow thruster in case of a malfunction of the relay, additional actuation of the main switch is not necessary
- Compatibility with all Side-Power bow and stern thrusters is guaranteed by using standard Side-Power components.
|Power at||3.0 kW|
|Thrust at||67 kg|
|Thrust equivalent||94 kg x 1.4|
|Rec. CCA||175 A|
|For ship length||12-15 m|
|Dimensions (LxWxH)||544 x 165 x 165 mm|
Clientes preguntan a clientes
Su pregunta será automáticamente enviada a otros clientes de SVB y publicada en la página del producto. Por favor no realice preguntas que sólo el equipo de SVB puede responder, como el estado de un pedido o la disponibilidad de un producto. Para preguntas que se refieren a un pedido, por favor contacte a nuestro equipo SVB por email email@example.com o por teléfono al: 960 13 06 40 .